How can I change the break pads on a 1995 325I bmw?

i want to know how to change the break pads on a 325i bmwHow can I change the break pads on a 1995 325I bmw?
there are many internet forums specific to the E36 bmw. You would be able to get much more specific information there, usually people will post photos also.



I recommend changing the rotors at the same time as the pads. It is not a difficult job to do. I changed the front pads and rotors on a E36 bmw in about 1hr. You just need some handle tools, and the ability to follow directions.



In general the steps are

1) jack up the car

2) remove the bolts and hold the caliper in place.

3) remove the bolts that hold the caliper mounting bracket to the hub. hang the caliper from the spring with some wire, don't let it hang by the brake line

4) take off the rotor and replace with a new one

5) use a c clamp to push the piston back into the caliper all the way (use the old brake pad, don't push on the piston directly)

6) replace the old pads with new ones, use the shims and clips from the old pads

7)replace all the bolts you removed and torque them to factory specs

8)put the wheel back on, don't forget to pump the brakes a few times so the pad contacts the rotor



it isn't a bad job, go on the forums and find a how-to with picturesHow can I change the break pads on a 1995 325I bmw?
The link below will take you to a step-by-step procedure with pictures. The whole procedure takes about 1 hour, and isn't very difficult.
Take your car to a brake place, ask them to replace the brakes.



Seriously, brakes are not something you want to mess with yourself. If you have to ask how to do it, you shouldn't be attempting it yourself.



At least if you go to a legitimate business and the brakes fail, your loved ones will have someone to sue. If you do it yourself and then later kill yourself, you only have yourself to blame.



There are certain things on a car you should not try to save on, tires and brakes. If you wanna change your own oil, that's fine, but unless you know what you are doing, leave the brakes alone.
You asked a specific question. You got some comments about how serious brake changes are, but that scolding from Mom didn't answer your specific question.



You also got a good comment pertaining directly to your question by Nicholas N. - with a step by step way to do it.



But Vaughn C. gave you the best answer.



Me? I got 2 points, but don't know what they do for me.
its a European car. you need to have special tools bro. its complicated. cant do it in your home garage. k? go to a AUTO SHOP

hair dryer

white hair