How to change break pads on 1995 camry le yourself?

take off lugnut dust cover then loosen each of the five lugnuts letting the weight of the car hold the tire still, now jack up the car and finish removing the wheel. now, using a 12 mm socket remove the caliper retaining bolts,(2) slide the caliper off of the rotor and remove the pads. use a ';c'; clamp to collapse the piston back in to the caliper, then install the pads as they came off, slide the caliper back over the rotor, install the two retaining bolts and then reinstall the wheel. after leting the car down off of the jack, make sure you check all the lugnuts again and put on the dust cover. get in the car and TEST YOUR BRAKES!they may go to the floor the first push untill they take up all the slack. don;t worry about bleedin the brakes because you didn't open the hydrolic system.How to change break pads on 1995 camry le yourself?
take off the rim, undo the screws on the backside of the caliper and take em out. that simple.How to change break pads on 1995 camry le yourself?
Very easy

Loose your front wheel nuts

Jack up

Take the wheel out

loose the bottom caliper nut by using probably 12 or 14 mm spanner

With a screw driver push the caliper upwards take the pads out.

If I miss anything Do that one too.

By the way to put a new pads in you have to push the caliper back you can do that by using a caliper spreader or by pusing it.

Dont forget to bleed after finishing it.

Cats

premade myspace