Open the rear hatch and look at the brake light cover and if you look carefully you will see it has a panel on the back of it. That little panel just snaps in and out. Use a small screwdriver or a pocket knife to pop out that panel and you will see the bulb sockets. Twist the bulb socket 1/4 turn counter-clockwise and pull it out and then just pull the bulb straight out of the socket.How do i change my third break light?
gotta check around area and see if you can pop cover off and get at bulbs
those covers usually either have 2 screws in them or they snap off. take the cover off and there,s the bulb.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.